|
HEADPHONES / SPEAKERS:
- 40mm in Diameter 90 micron thick Mylar pistons.
- Frequency Response: 0.1-12.5Khz.
- Sensitivity, re: .0002 dynes/cm2, @ 1mW, @1KHz: >75 dB
- Impedance, Mono, 150 ohms
- Impedance, Stereo,300 ohms
- Volume control Deviation: 15 dB
- Maximum output: 115 dB @ 1cm.
- Stereo channel separation: >80 dB
MICROPHONE:
- Noise Canceling Electret Condenser, with Low output
impedance line driver.
- Frequency response: 100Hz-10kHz
- Microphone output (nom): @ 1Kz 9 VDC, 600 ohm
- Load, re: 1v/uBar: -51 dB
- Output impedance: 100 ohms, Min, DC
- Noise rejection ratio: 10-1, to 1Kz
- Front to back noise ratio: 1X 10-3 to 10dB
- DC supply voltage: 5-16 volts 2.5ma. Max.
|
MECHANICAL:
- NRR rating, EPA tested: -24 dB
- Cord length: 66 inches
- Weight: 13.9 oz
- Nominal head squeeze pressure: 1.7 oz
ENVIRONMENTAL:
- Operating temp range: From 0°C to + 80°C
- Rust resistant CRES Mic boom, stirrups and headband
- Dual 3.5mm plugs with metal covers
- Designed to meet requirements of TSO-C57a
|
|
FIVE YEAR UNCONDITIONAL WARRANTY
Your Softcomm C-20-MPCS-1 & P Headset is warranted against defects for
Five years from date of purchase, whether
purchased from Softcomm Products, Inc., a Softcomm distributor or
dealer. Within this period, we will repair or exchange (at our
option) without charge for parts or labor. Simply return your
headset, along with proof of purchase, to SOFTCOMM PRODUCTS, INC., 2310
South Airport Blvd., Chandler, AZ 85249. Warranty does not cover product subject to owner-tampering, misuse or accidental
damage. ** We are
proud of what we manufacture and we offer full service on all products we
sell **
|
