|
HIGH-PERFORMANCE
FEATURES
|
- New technology and material for greater noise control.
- New High-level of audio performance.
- Built-in adjustment points for personal fitting and "no
squeeze" comfort.
- New contoured foam head pad that eliminates "hot
spots".
|
- Dual volume controls.
- Six-way positive position Mic-boom.
- Long reinforced 66 inch super flexible cables.
- Gold plated microphone and headphone connector plugs.
|
Whatever your destination, you can now
enjoy your flying experience even more with the all new Model C-40
PRO-AM headset. Weighing only 12.3 ounces, this lightweight,
rugged model has been carefully engineered for clarity, performance
and reliability.
Constructed from new durable aerospace
material, this headset offers a breakthrough in comfort and noise
attenuation. For example, the new adjustable Six pillow, soft
foam head pad is designed to conform to head contours and eliminate
"hot spots" on extra long flights.
The Extra Soft Foam ear seals
are made to surround the ears with quiet comfort. This blocks
noise interference and provides the optimum comfort in a
"no-squeeze" fit for hours of use. With a Noise
Reduction Rating of -23 dB, Quiet is what you will hear.
An improved solid state Electret M-55 Condenser
Microphone offers the finest
in audio clarity and noise-canceling properties. The six-way adjustable
"friction boom" allows for precision placement of the
microphone and can be positioned on either side of the mouth.
The long, heavy duty cable assembly can
withstand strains up to 95 pounds and retain its flexibility from
-40° to +120°F. Attached to the cables are gold plated
connector plugs that are designed to eliminate connector static.
With Softcomm's quality, a three-year
warranty and a suggested low retail price of only $115.00, this the
makes PRO-AM
headset an excellent value.
|
|
SPECIFICATIONS
|
HEADPHONES / SPEAKERS:
- 40mm in Diameter 90 micron thick Mylar pistons.
- Frequency Response: 0.1-12.5Khz.
- Sensitivity, re: .0002 dynes/cm2, @1mW, @1KHz: >75 dB
- Impedance, Mono, 150 ohms
- Impedance, Stereo, 300 ohms
- Volume control Deviation: 15 dB
- Maximum output: 115 dB @ 1cm.
- Stereo channel separation: >80 dB
MICROPHONE:
- Noise Canceling Electret Condenser, with Low output
impedance line driver.
- Frequency response: 100Hz-10kHz
- Microphone output (nom): @ 1Kz 9 VDC, 600 ohm
- Load, re: 1v/uBar: -51 dB
- Output impedance: 100 ohms, Min, DC
- Noise rejection ratio: 10-1, to 1Kz
- Front to back noise ratio: 1X 10-3 to 10 dB
- DC supply voltage: 5-16 volts 2.5ma.
|
MECHANICAL:
- EPA NRR rating, tested: -23 dB
- Cord length: 66 inches
- Head Weight: 12.3 oz
- Nominal head squeeze pressure: 1.7 oz
ENVIRONMENTAL:
- Operating temp range: From 0°C to +80°C
- Rust resistant CRES Mic boom, stirrups and headband
- PJ-068, gold plated microphone connector
- PJ-055B, gold plated headphone connector
- 90 micron, mylar speakers
- Designed to meet requirements of TWO-C57a
|
|
THREE YEAR LIMITED WARRANTY
Your Softcomm C-40 PRO-AM Headset is warranted against defects for
three years from date of purchase, whether purchased from Softcomm
Products, Inc., a Softcomm distributor or dealer. Within this
period, we will repair or exchange (at our option) without charge for
parts or labor. Simply return your headset, along with proof of
purchase, to SOFTCOMM PRODUCTS, INC., 2310 South Airport Blvd.,
Chandler, AZ 85249. Include $10.00 for return shipping and
handling. Warranty does not cover owner-tampering, misuse or accidental damage.
** We are proud of what
we manufacture and we offer full service on all products we sell. **
|
