ATC-2-SP2

This New Ultra-lo power draw intercom is ideal for situations Where AC power is not available. It uses only 1 ma standby current. (with Dynamic Mic elements in the handsets) This means a standard 6 volt lantern style battery can last for 6 months 24 hours a day, Plus! The ATC-2-SP2 is available in several configurations for type of Handsets and Power Supply Requirements making this a very Versatile Little Intercom!

The ATC-2-SP2 is Perfect for Solar Powering!

(note: Carbon and Electret condenser Mic elements draw a small amount of power also. Please read the technical specs to determine total current draw for your application.)

• Optional weather sealing, allows intercom to placed out side directly in the elements.
• Rail to Rail audio amplifiers can swing 98% of 1/2 Vcc into 8 ohms.
• up to 6 handsets can be used on a single intercom. (suffix C model)
• Super Easy Installation.
• Optional Adjustable microphone gain. (suffix -G)
• Super Compact, 2.25 X 3 X 1 inches.
• Low Distortion. Less than .5% @ 1Khz. at rated output of 25 mw.
• 3 year warrantee.

• Suffix B=  6 Volts DC. Battery powered. This Model will operate between 2 thru 6 volts. Power for this unit must not exceed 6 Volts. Designed for Batteries only.
• Suffix R= 8 thru 32 Volts AC or DC. This Perfect if already have 24 Vac. distributed for surveillance purposes... Plus, this model is internally  regulated, so a wide variance in Power Supply Voltage will not change the gain characteristics from unit to unit.

• Suffix C = Carbon  Microphone Element. These mics typically require about 3.0 ma. current each. The ATC-2SP-2-C delivers approximately 1.75 ma. which to each Mic. This raises the distortion of the of the Mic element a little, but intelligibility is still 100% . The only real advantage to this Mic element is that, they are almost totally indestructible.
• Suffix D = Dynamic Microphone Element. This model is transformer coupled at input. Standard 75 thru 600 ohm. moving coil elements work great. Their not as tough as a Carbon, but very very close...
• Suffix E = Electret Condenser Mic Elements. These type of mics require a small    amount of power. Usually around 250 ua. (0.25 ma.) So each pair of  handsets (up to 4 maximum) will raise the total current draw .5 ma. However they are more prevalent to damage from Mechanical Shock

   Order these intercoms as ATC-2-SP2 + The suffixes that apply to  your needs.

Click for Order Info

THREE YEAR UNCONDITIONAL WARRANTEE

Your SoftComm ATC-2-SP2 are warranted against defects for Three years from date of purchase. Within this period, we will repair or exchange (at our option) without charge for parts or labor. Simply return your headset, along with proof of purchase, to SOFTCOMM PRODUCTS, INC., 2310 South Airport Blvd., Chandler, AZ 85249.  Include $10.00 for return shipping and handling.   Warranty does not cover transportation costs or a product subject to owner-tampering, misuse or accidental damage.
** We are proud of what we manufacture and we offer full service on all products we sell. **